The following is the specific operation procedure to realize the power-on automatic start function of the inverter:
1. Hardware connection setting
First of all, the external wiring of the inverter needs to be adjusted. The specific operation is to short the COM port and X1 port of the inverter. This connection is the basis for realizing the power-on automatic start function to ensure that the start signal can be triggered at the moment of power-on.
2. Parameter Configuration Adjustment
After completing the hardware connection, it is necessary to set the parameters of the inverter to ensure that it can run according to the preset mode. The specific operation is as follows:
Open the operation panel of the inverter and enter the parameter setting menu.
Find the F0.01 parameter, which is used to define the selection of frequency source.
Change the value of the F0.01 parameter from the default setting to 1 to indicate the selection of the “terminal start/stop” mode. This setting enables the inverter to control the motor start and stop through external terminal signal.
3. Function Verification
After completing the above hardware connection and parameter setting, the inverter will have the function of power-on automatic start. At this time, when the inverter is powered on, the motor will automatically start and run normally according to the preset frequency.
In the process of using inverter, if you encounter any technical problems or operational difficulties, please feel free to contact us. Our technical support team will provide you with professional technical guidance and solutions to ensure that your equipment can run efficiently and stably.
In addition, we are actively recruiting distributor partners to jointly expand the market and promote quality products. We sincerely invite interested partners to join us and work together to create a better future. If you are interested in cooperation, please feel free to contact us to discuss cooperation matters.
