CNC Engraving Machine

Abstract: CNC engraving machine has gradually become a necessary professional tool for production in various industries. Spindle system is an important component of CNC engraving machine, its performance has a critical impact on the performance of the entire CNC engraving machine. Frequency converter as the heart of the spindle system, is an indispensable key component. This paper introduces the T510 series frequency converter developed by TETRANCA Electric Technology Co., Ltd. in the application of engraving and milling machine.

Introduction

At present, CNC engraving machine has gradually become a necessary professional tool for the production of various industries. With the development and application of CNC technology with high-performance frequency converter controller and servo drive equipment in various production industries, CNC engraving machine has increasingly become the mainstream configuration of today’s engraving industry.

Spindle system is an important component of CNC engraving machine, its performance on the performance of CNC engraving machine has a critical impact. Frequency converter as the heart of the spindle system, is an indispensable key component.

Use effect

Through on-site debugging to achieve the following effects:

1, motor start and stop time can reach 0.5 seconds; (an imported brand start and stop time is more than 1 second) Based on TETRANCA Electric T510 series frequency converter with excellent control performance, has a good control effect to meet the engraving and milling machine instantaneous instantaneous stop demanding, can greatly improve the efficiency of engraving and milling workpiece. 2, the braking effect is remarkable, can be used in the engraving and milling machine to achieve a good control effect, can be used in the engraving and milling machine to achieve a good control effect.

2, braking effect is remarkable, can achieve instant holding without jitter effect; (an imported brand after stopping the spindle has jitter phenomenon) Due to the excellent deceleration and stopping control performance of TETRANCA Electric T510 series frequency converter, to meet the requirements of instantaneous stopping without jitter, and effectively prevent the engraving and milling machine from scratching the workpiece, to ensure product quality and technology.

3, low-frequency torque; T510 series inverter excellent low-frequency characteristics (0.25Hz can reach 150% of the rated torque), to meet the engraving and milling machine low-frequency drilling and other process requirements, wide frequency range.

4, the motor noise is significantly reduced, the motor sound is very small, very stable; full range of three-phase modulation technology, more stable control, lower noise.

5、 Low running current, inverter running current is around 1.2A; excellent control performance, more stable current.

6, smaller size, detailed structure, exquisite appearance; adopts half-book structure, smaller installation space; Tianchuan Electric green-gray color, rich texture, sense of technology, more beautiful appearance.

7, installation, debugging more convenient; adopts plug-in I / O board, wiring is convenient; keyboard with parameter copy download function, greatly reducing the debugging workload.